Raspberry Pi 3 Model B Starter Pack

This pack contains:

• Raspberry Pi 3 - Model B - ARMv8 with 1G RAM AND built-in WiFi - The FRESHEST freshness that's EVEN MORE FRESH than the already fresh Pi 2.  This is hot off the presses, selling-like-hotcakes, Wi-Fi enabled, blindingly fast, credit card sized computer with quad USB ports, quad-core ARMv8, 1G RAM, and a little BlueFruit Low Energy that all make this board essential.
• Adafruit Raspberry Pi B+ Case - Smoke Base / Clear Top - We think it's the Single Greatest Raspberry Pi 2 Model B Case Ever.  This will still work with your Pi 3.
• Adafruit Assembled Pi Cobbler Plus - This is the soldered together version of our popular Pi Cobbler Plus Kit.  Comes with a breakout board that's perfect for cobbling prototypes as well as a 40-pin GPIO cable for your Pi's pins.  Still works with the Pi 3.
• ​Full Size Breadboard - In the past, we've used the half-size breadboard for a lot of Pi projects - but no longer! WIth 40 pins to break out, you're going to need some space - and that's why we're including a full size breadboard in this pack.
• Premium Male/Male Jumper Wires - 20 x 6" (150mm) - These jumper wires are great for making wire harness or jumpering between headers on PCBs.  We include the longer ones so they work well with the full-size breadboard.
• USB to TTL Serial Cable - An old standby, this cable's pretty much the easiest way to connect your Raspberry Pi to a USB port to log into the debugging/login console. Ideal for running the Pi 'headless'
• 8 GB SD Card pre-installed with the latest NOOBs distribution - As of October 24th, 2016 this pack now contains the 8GB microSDHC card programmed with the latest Raspberry Pi NOOBs distribution.  
• 5V 2.4A Switching Power Supply w/ 6' MicroUSB Cable - The 5V 2A power adapter is the perfect choice for powering your Raspberry Pi B+ with 2 Amps of current output, and an extra long cord.  Note: As of March 28th, 2016 we've updated our power supply to be 5V 2.4A.
• Embroidered Raspberry Pi Badge - Now that you're getting started, show off your Pi Pride with this beautifully embroidered, jewel toned, iron-on badge.
• BONUS PARTS! Everyone loves bonuses so we include some parts that will get you through some of the tutorials on the Adafruit Learning System.  These include:
• 1x Photo Cell
• 5x 10K 5% 1/4W Resistor
• 5x 560 ohm 5% 1/4W Resistor
• 1x Diffused 10mm Blue LED
• 1x Electrolytic Capacitor - 1.0uF
• 1x Diffused 10mm Red LED
• 1x Diffused 10mm Green LED
• 3x 12mm Tactile Switches